KLS6-DXL Photoresistances manufacturer from China NINGBO KLS IMP&EXP CO.LTD.

Place of Origin:

, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

capability characteristics:
●环氧树脂封装(Coated with epoxy)	●可靠性好(Good reliability)
●体积小(Small volume)	●灵敏度高(High sensitivity)
●反应速度快(Quick response)	●光谱特性好(Good spectrum characteristic)

application range：
●照相机自动测光(Camera automation photometry)	●光电控制(Photoelectric control)
●室内光线控制(Indoor sunlight control)	●报警器(Annunciator)
●工业控制(Industrial control)	●光控开关(Optical control switch)
●光控灯(Optical control lamp)	●电子玩具(Electronic toy)
●光控音乐I.C(Optical control musicI.C)	●电子验钞机(Electronic proverbial vlitional)

Testing condition：

●亮电阻
用400～600Lux光照射2小时后,在标准光源A(色温2856K)下,用10Lux光测量。

●Light resistance
Irradiate by 400-600Lux light for two housrs,then test with 10Lux under standard light source A(as color temperature 2856K)

●暗电阻
关闭10Lux光照后第10秒的电阻值。

●Dark resistance
Refer to the resistance value ten seconds after the 10Lux light is shut up.

●值是指10Lux照度和100Lux照度下的标准值。

●value is the standard value under 10Lux and 100Lux.

●	R10.R100分别为10Lux、100Lux照度下的电阻值 (的公差为±0.1)

●value is the standard value under 10Lux and 100Lux.

R10、R100 are the resistance under 10Lux and 100Lux respectively.

●最大功率损耗
环境温度为25℃的最大功率。

●Max power consumption:
Maximum power at the environmental temperature 25℃

●最大外加电压
在黑暗中可连续施加给元件的最大电压。

●Max external voltage:
Maximum voltage to be continuously given to component in the dark.


SMT TYPE	METAL MATERIAL	Φ4 、Φ5、Φ7、Φ9、Φ11、 Φ12、Φ20、Φ25

规格型号

(Speci fica- trion)	Type	(VDC) Max. Voltage (VDC)	(MW) Max. Power consum- ption (MW)	Enviro- nmental temper- ature	(nm) Spec- trum peak value	Light resis- tance10Lux KΩ	Dark resis- tance (MΩ)	100/10	Response time		illum- inance resis- tance Chara- cteristic
(Speci fica- trion)	Type	(VDC) Max. Voltage (VDC)	(MW) Max. Power consum- ption (MW)	Enviro- nmental temper- ature	(nm) Spec- trum peak value	Light resis- tance10Lux KΩ	Dark resis- tance (MΩ)	100/10	Incr- ease	Decr- ease	illum- inance resis- tance Chara- cteristic
Φ4	DXL4526	150	50	-30～+70	540	8-20	0.5	0.6	30	30	3
	DXL4537	150	50	-30～+70	540	18-50	2.0	0.7	30	30	4
	DXL4548	150	50	-30～+70	540	45-140	5.0	0.8	30	30	6
Φ5	DXL5516	150	90	-30～+70	540	5-10	0.2	0.6	30	30	2
	DXL5528	150	100	-30～+70	540	8-20	1.0	0.7	20	30	3
	DXL5537	150	100	-30～+70	540	18-50	2.0	0.7	20	30	4
	DXL5539	150	100	-30～+70	540	30-90	5.0	0.8	20	30	5
	DXL5549	150	100	-30～+60	540	45-140	10.0	0.8	30	30	6
	DXL5516D	150	100	-30～+70	560	5-10	1.0	0.6	20	30	2
	DXL5626D	150	100	-30～+70	560	8-20	2.0	0.6	20	30	3
	DXL5637D	150	100	-30～+70	560	18-50	5.0	0.7	20	30	4
	DXL5639D	150	100	-30～+70	560	30-90	8.0	0.8	20	30	5
	DXL5649D	150	100	-30～+70	560	50-160	20.0	0.8	20	30	6
	DXL5526F	150	100	-30～+70	540	8-20	0.5	0.6	30	30	3
	DXL5537F	150	100	-30～+70	540	18-50	1.0	0.7	30	30	4
	DXL5549F	150	100	-30～+70	540	45-140	5.0	0.8	30	30	6
Φ7	DXL7516	150	100	-30～+70	560	4-10	0.5	0.6	20	30	2
	DXL7528	150	150	-30～+70	560	8-20	2.0	0.7	20	30	3
	DXL7638	150	150	-30～+70	560	18-50	5.0	0.8	20	30	4
	DXL7649	150	150	-30～+70	560	45-140	10.0	0.8	20	30	6
Φ9	DXL9516	150	100	-30～+70	540	5-10	0.5	0.6	30	30	2
	DXL9517	150	100	-30～+70	540	10-20	1.0	0.6	30	30	3
	DXL9528	150	150	-30～+70	560	20-30	2.0	0.7	30	30	4
	DXL9537	150	150	-30～+70	560	30-50	4.0	0.8	30	30	4
	DXL9539	150	150	-30～+70	560	50-100	8.0	0.8	30	30	6
Φ11	DXL11528	250	200	-30～+70	560	8-20	2.0	0.6	20	30	3
	DXL11537	250	200	-30～+70	560	18-50	5.0	0.7	20	30	4
	DXL11549	250	200	-30～+70	560	45-140	10.0	0.8	30	30	6
Φ12	DXL12528	250	200	-30～+70	560	8-20	2.0	0.6	20	30	3
	DXL12537	250	200	-30～+70	560	18-50	5.0	0.7	20	30	4
	DXL12549	250	200	-30～+70	560	45-140	10.0	0.8	30	30	6
Φ20	DXL20528	500	500	-30～+70	560	8-20	2.0	0.6	30	30	3
	DXL20537	500	500	-30～+70	560	18-50	5.0	0.7	30	30	4
	DXL20549	500	500	-30～+70	560	45-140	10.0	0.8	30	30	6
Φ25	DXL25528	500	500	-30～+70	560	8-20	2.0	0.6	30	30	3
	DXL25537	500	500	-30～+70	560	18-50	5.0	0.7	30	30	4
	DXL25549	500	500	-30～+70	560	45-140	10.0	0.8	30	30	6
METAL MATERIAL	DXL5510	150	100	-30～+70	550	5-10	0.5	0.6	30	30	2
	DXL5515	150	100	-30～+70	550	10-30	4.0	0.7	30	30	3
	DXL5525	150	100	-30～+70	550	30-50	10.0	0.75	30	30	4
	DXL5558	150	100	-30～+70	550	50-100	20.0	0.85	30	30	4
SMT TYPE	DXL12528	250	200	-30～+70	560	8-20	2.0	0.6	20	30	3
	DXL12537	250	200	-30～+70	560	18-50	5.0	0.7	20	30	4
	DXL12549	250	200	-30～+70	560	45-140	10.0	0.8	30	30	6