Mechanical life：10,000 cycles min
Electrical life：10,000 cycles min
Contact Rating：0.1Amps @50 VDC
Insulation Resistance：＞100MΩ DC100V
Withstand Voltage：AC100V 1 minute
Contact Resistance：＜100mΩ
Ambient Humidity：＜85%RH
Operating Temper：-25℃ to 70℃
Soldering Process：Hand soldering：Use a soldering iron of 30 watts, controlled at 360℃ approximately 3 seconds while applying solder.
Wave soldering： When applying wave soldering, The plastic using PA6T(HTN), the peak temperature of the wave Oven should be set to 260℃max. Condition for soldering (Wave & Non-washable Type) Temperature Profile:（Figure 1）
Reflow soldering：When applying reflow soldering, The plastic using PA6T(HTN), the peak temperature of the reflow Oven should be set to 250℃max. Condition for soldering (Reflow & Non-washable Type) Temperature Profile:（Figure 2）
